0 items, £0.00inc. delivery & VAT
Free samples: 0 items
Home >> Guide to Blinds >> How to Fit Roller Blinds
To browse our collection of roller blinds and buy online click here or read our step by step fitting instructions below..
1. Brackets: 2
Idle End Pin Bracket
Chain End Bracket
2. Plastic Inserts: 1
Idle End Pin
3. Wood Screws: 4
4. Screws: 4, Rawl Plugs: 4
5. Blind: 1
If fitting the blind outside the window, measurements (C) will need to be the same. To work out (C), simply minus (B) from (A) and divide the answer by two. Follow instructions for FACE FIXING.
Decide whether to FACE or TOP FIX. FACE FIX to fit the bracket to the window frame. TOP FIX to the lintel if the window frame is uPVC, or if there are any obstructions, e.g. window handles.
Slide idle end pin upwards between the teeth of the bracket until it clicks into place.
Press brackets into the corresponding ends of the blind, offer the blind into the fixing position.
Now mark the position of holes for drilling.
Drill the two holes per bracket where marked and screw brackets into position.
Remove the plastic end pin from the bracket and place it in the end of the roller blind. Then insert into the bracket. (1)
Holding the fully-wound blind, position chain cap as shown and press into the corresponding bracket. (2)
Gently pull the chain to raise and lower the roller blind.
WARNINGIN THE INTEREST OF SAFETY, IT IS ADVISABLE TO KEEP ALL PULL CORDS AND CHAIN/BEAD CORDS OUT OF THE REACH OF CHILDREN.
: Measure & Install
: Roller Blinds
NewBlinds.co.uk is Upfront