• VELUX Blinds
• FAKRO RoofLITE Blinds

• Vertical Blinds
• Venetian Blinds
• Conservatory Blinds
• Blackout Blinds
• Wooden Blinds
• Woodweave Blinds
• Roller Blinds
• Roman Blinds
• Panel Blinds
• Pleated Blinds

• Fly Screens
• Parasols
• Picture Blinds
• Remote Control Blinds
• Cubicle Curtains

• Cleaning Products

ViewCheckout

0 items, £0.00
inc. delivery & VAT

Free samples: 0 items

ViewOrder

Fittings for Venetian Blinds

1. Brackets: quantity to suit length of blind

2. Screws: min 4

3. Rawl plugs: min 4

4. Blind: 1 (15mm/25mm/35mm)

Step One

Outside Recess

If fitting the blind outside the window, measurements (C) will need to be the same. To work out (C), simply minus (B) from (A) and divide the answer by two. Follow instructions for FACE FIXING.

Inside Recess

Decide whether to FACE or TOP FIX. FACE FIX to fit the bracket to the window frame. TOP FIX to the lintel if the window frame is uPVC, or if there are any obstructions, e.g. window handles.

Step Two

Place blind in fitting position and tilt forward to show ladder controls. When fitting the brackets, you will need to leave at least 5cm either side of controls.

View from above

Step Three

Top Fixing

Measure the distance that any handles protrude from the frame, A. Mark this measurement on the lintel and use it to position the back of the bracket. Mark the position of holes B and screw bracket to lintel using screws and rawl plugs supplied.

Face Fixing

Position bracket with swing arm facing towards you, and mark holes B. Screw bracket in place. Use rawl plugs if fitting to the wall.

Step Four

Push swing arm anti-clockwise as far as it will go. Now clip the blind over the bracket, first easing the front lip of the headrail A in to place.

Step Five

Push swing arm clockwise until it locks in to place, firmly holding the blind headrail.

Step Six

Use cord control A to raise and lower the blind. The wand control B turns to adjust the slat angle*.

*On 50mm blinds slat angle is adjusted by cord control.