Other:

RSS Feed

Remote Control Roller Blinds - Installation and Programming instructions

16/01/2009

Remote Control Blinds are simple to install. You can see instructions for installing them, here. The only additional steps that you need to take are the positioning of your battery and the programming of your blinds using the remote control hand set.

When you unpack your blind battery and remote handset, you’ll see that the battery comes with clip brackets which mean that it can be positioned near the blind. It's up to you whether you position it somewhere discrete, behind or above the blind.

Once you have fitted the blind(s) and positioned the battery, it is time to program your remote to the blind(s). Here are some detailed instructions.

Please note: If you have more than one blind to program, you will need to unplug the batteries of every blind except the one that you are programming.

1. Motor Overview

The motor end of your remote control roller blind incorporates a small plug socket so that the battery lead can be plugged into the motor.

Next to the socket is a small reset button which can be used to reset the programming of the motor. If at any time you need to reset your motor programming, this button needs to be pressed with a paperclip.

2. Power to the motor

Connect battery pack then continue to step three.

3. Select the channel that you wish to programme the blind to.

If you are using a single channel control, then move to step 4.

If you are using a handset with more than one channel, then you will need to select the channel to which you want to programme this blind to.

4. Control the motor and the correct direction of rotation

On the remote handset, press and hold simultaneously the Up and Down button. The blind should double shunt.

Press and hold the down button, does the blind move down?

If yes - the blind moves down while pressing the down button go to step 6.

If no - the blind moves up while pressing the down move to step 5.

5. Reverse the direction of rotation

To reverse the direction of the motor, press and hold the “MY” button until the blind double shunts.

Press and hold the Down button to test that the motor direction is correct. Continue to step 6.

6. Record the up limit position

Use the up button to move the blind until it reaches the position that you wish to be the upper limit.

Press and hold the “MY” and Down buttons until the blind starts to move down.

By pressing the "MY button", stop the blind at the desired down limit position (adjust with Up or Down if required).

7. Record the down limit position

Press and hold the “MY” and Up buttons until the blind starts to move up.

The blind will automatically stop at the upper limit position.

Press and hold the “MY” button until the double shunts to confirm the upper and lower limit settings.

8. Programming the Handset to the motor

Press the program button (usually on the back of the handset) - and the product double shunts. The blind is now programmed to the handset.

Tip: Use only use one handset throughout the commissioning procedure.

9. Programming the rest of your blinds.

If you have more than one blind, you will now have to unplug the battery of the blind that you have just programmed. Plug in the battery of the next blind and go back to Step 3.

To download a pdf version of these instructions complete with images, click here.

To purchase remote operated blinds click here: Remote Control Blinds.

Posted in : Measure & Install : Remote Control Blinds